Snmp Agent Version - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The SNMP agent function is disabled.

Further notes

You enable the SNMP agent function with the

snmp agent version

With this command, you configure whether all SNMP queries or only SNMP V3 queries are

You are in the Global Configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

snmp agent version{v3only|all}

The parameters have the following meaning:

The setting is configured.

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

only SNMP V3 queries are processed

all SNMP queries are processed

Network protocols

Scalance xr-500