Show Ip Ospf - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.3 OSPFv2
Parameters
adv-router
ip-address
Result
The summary of the database is displayed.
9.3.4 show ip ospf ... database ...
Description
This command shows information about a specific or all LSA types.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:

show ip ospf

database
362
Description
Keyword for the router-specific LSA
shows the router-specific LSA for a
specific IP address
or
cli#
[area-id]
{
asbr-summary|external|network|
nssa-external|router|summary
}
[link-state-id]
[{
adv-router <ip-address>|self-originate
}]
Range of values
specify a valid IP address.
If no IP address is entered, the specific
LSAs of the local router are displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07