Mac Access-List Extended - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.3 MAC access control list
11.3.3.1

mac access-list extended

Description
With this command, you generate a MAC access control list and change to the MAC ACL
configuration mode.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
mac access-list extended<access-list-number(1-128)>
The parameter has the following meaning:
Parameters
access-list-number
Result
A MAC access control list has been generated.
You are now in the MAC ACL configuration mode.
The command prompt is as follows:
cli(config-ext-macl)#
Further notes
You delete the MAC access control list with the
You exit the MAC ACL configuration mode with the
You display the configuration of the access control list with the
488
Description
Number of the access control list
no mac access-list extended
exit
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
1 ... 128
command.
command.
show access-lists
command.