Dhcp Client; Show Ip Dhcp Client Stats; Show Ip Dhcp Client - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

DHCP client

This section describes commands of the Dynamic Host Configuration Protocol (DHCP).

With this command, you display the statistical counters of the DHCP client.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ip dhcp client stats

The counters are displayed.

With this command, you display the configuration settings of the DHCP client.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ip dhcp client

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Network protocols

7.2 DHCP client

Scalance xr-500