Show Spanning-Tree Detail - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Network structures

6.3 Spanning Tree

Call up the command with the following parameters:

show spanning-tree bridge

[{address|forward-time|hello-time|id|max-age|protocol|priority|detail}]

The parameters have the following meaning:

The settings for the spanning tree function of the bridge are displayed.

show spanning-tree detail

This command shows the detailed settings of the spanning tree function.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show spanning-tree detail

The detailed settings for the spanning tree function are displayed.

Shows the MAC address of the bridge

Shows the time that the bridge is in the listening mode when changing from the

blocking mode to the learning mode

Shows the time after which the bridge sends configuration BPDUs

Shows the ID of the bridge

Shows the maximum age of the data packet after which it is deleted

Shows the protocol used

Shows the priority of the bridge

Shows detailed information about the spanning tree settings of the interface

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Scalance xr-500