Layer 3 functions
9.3 OSPFv2
9.3.14.4
no ip ospf authentication-key
Description
With this command, you delete the password.
Note
This command is available only with layer 3.
Requirement
● The interface is a layer 3 interface.
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameter assignment:
no ip ospf authentication-key
Result
The password is deleted.
Further notes
You configure the password with the
9.3.14.5
ip ospf cost
Description
With this command, you specify the costs for the OSPF interface.
Note
This command is available only with layer 3.
Requirement
● The interface is a layer 3 interface.
402
ip ospf authentication-key
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.