Layer 2 management protocols
8.6 Multicast
8.6.4.3
no mac-address-table static multicast
Description
With this command, you delete a static multicast address.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no mac-address-table static multicast <aa:bb:cc:dd:ee:ff> vlan <vlan-id(1-4094)>
The parameters have the following meaning:
Parameter
vlan
address
-
If you do not select any parameters from the parameter list, the default value is used.
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 30)".
Result
The static multicast function is disabled.
356
Description
Keyword for a VLAN
Keyword for a MAC address
MAC address
Range of values / note
1 ... 4094
-
aa:bb:cc:dd:ee:ff
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07