No Severity - Siemens SCALANCE XM-400 Configuration Manual

12.1.14.9

no severity

Description
With this command, you disable the sending of events.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli (config-events) #
Syntax
Call up the command with the following parameters:
no severity {mail | log | syslog }
The parameters have the following meaning:
Parameter
mail
log
syslog
If you do not select any parameters from the parameter list, the default value is used.
Result
The settings for sending event messages are configured.
Further notes
You enable the setting with the
You display the status of this function and other information
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
Specifies that messages are no longer sent by e-
mail.
Specifies that messages are no longer sent to the
log file.
Specifies that messages are no longer sent to the
Syslog server.
severity
command.
show events config
Diagnostics
12.1 Event and fault handling
Range of values / note
-
Default
-
.
561