Client Config - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.1 Event and fault handling
Syntax
Call the command without parameters:
add log <log entry>
The parameter has the following meaning:
Parameter
log entry
Result
The entry has been made in the logbook.
12.1.6.2

client config

Description
With this command, you enable one of the clients that processes or forwards the messages
of the device.
The following clients are available:
●
syslog
●
trap
●
email
Requirement
You are in the EVENTS Configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
client config {syslog|trap|email|all}
The parameters have the following meaning:
Parameter
syslog
trap
email
all
768
Description
Entry in the logbook
: sends the messages to the Syslog server
: sends the messages as SNMP trap to a configured recipient
: sends the messages as e-mail
Description
Enables the client that sends the messages to the Syslog server
Enables the client that sends the SNMP traps
Enables the client that sends the e-mails
Enables all clients at once
Range of values / note
max. 150 characters
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10