Show Dot1X Guest-Vlan Mac-Info; Show Dot1X Mac-Auth Mac-Info - Siemens SCALANCE XC-200 Configuration Manual

11.5.1.2

show dot1x guest-vlan mac-info

Description
This command displays which MAC address and which port are assigned to a guest VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show dot1x guest-vlan mac-info
Result
A list with guest VLAN, MAC address and port is displayed.
11.5.1.3

show dot1x mac-auth mac-info

Description
This command shows the MAC addresses for which MAC authentication is enabled.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show dot1x mac-auth mac-info
Result
A list of the MAC addresses is displayed.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Security and authentication
11.5 Port Based Network Access Control
525