No Ip Ospf Authentication-Key; Ip Ospf Cost - Siemens SCALANCE XM-400 Configuration Manual

9.2.4.4

no ip ospf authentication-key

Description
With this command, you delete the password.
Note
This command is available only with layer 3.
Requirement
● The interface is an IPv4 interface.
● You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
Syntax
Call the command without parameter assignment:
no ip ospf authentication-key
Result
The password is deleted.
Further notes
You configure the password with the
9.2.4.5

ip ospf cost

Description
With this command, you specify the costs for the OSPF interface.
Note
This command is available only with layer 3.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
ip ospf authentication-key
Layer 3 functions
9.2 OSPFv2 (IPv4)
command.
485