No Ip Igmp Vlan-Snooping; Ip Igmp Snooping Clear Counters - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.2 IGMP snooping
Further notes
You disable IGMP snooping with the
8.2.2.3

no ip igmp vlan-snooping

Description
With this command, you disable IGMP snooping for all VLANs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip igmp vlan-snooping
Result
IGMP snooping is disabled for all VLANs.
Further notes
You enable IGMP snooping with the
8.2.2.4

ip igmp snooping clear counters

Description
With this command, you delete the counters for all or a selected VLAN.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
396
no ip igmp vlan-snooping
ip igmp vlan-snooping
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
command.