Snmp Community Index - Siemens SCALANCE XC-200 Configuration Manual

Network protocols
7.5 SNMP
You display the configured SNMP groups with the show snmp group command.
You display the access configurations for SNMP groups with the show snmp group
access command.
You display the configured SNMP tree views with the show snmp viewtree command.
7.5.2.6

snmp community index

Description
With this command, you configure the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp community index <CommunityIndex> name <CommunityName>
The parameters have the following meaning:
Parameter
CommunityIndex
name
CommunityName
security
SecurityName
context
Name
Storage type
334
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
Description
Index of the community
Keyword for the name of the community -
Name of the community
Keyword for the security name
Security name
Keyword for the context name
Context name
Specifies whether the settings remain
following a restart.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
max. 32 characters
max. 32 characters
-
max. 32 characters
-
max. 32 characters
● :
The settings are lost after a
restart
● :
The settings are retained after
a restart
Configuration Manual, 07/2017, C79000-G8976-C361-06