Ipv4 Subnet-Based Vlan - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.5 The "Layer 2" menu
5.5.4.6

IPv4 subnet-based VLAN

Introduction
On this page, you specify which VLAN ID is assigned to the subnet.
Description of the displayed boxes
The page contains the following boxes:
● Subnet-based VLAN
Enable or disable the IPv4 subnet-based VLAN assignment.
● Port
Select the port in the drop-down list. All available ports and the link aggregations can be
selected.
● Subnet Address
Enter the IPv4 address of the subnet.
Example: 192.168.10.0 for the network 192.168.10.x with nodes 192.168.10.1 to
192.168.10.254.
● Subnet Mask
Enter the subnet mask.
The table has the following columns:
● Select
Select the row you want to delete.
● Port
All available ports and the link aggregations are displayed.
● Subnet Address
Shows the subnet address assigned to the port.
266
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12