Show Alarms - Dell Z9500 Reference Manual

Version
7.6.1.0
7.5.1.0
E-Series
Usage If you do not specify parameters and enter service timestamps, it appears as service
Information timestamps debug uptime in the running-configuration.
To view the current options set for the service timestamps command, use the
show running-config command.

show alarms

View alarms for the system Core, switching core, port modules, fan trays, and power supplies.
Z9500
Syntax
show alarms [threshold]
Parameters
threshold
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Control and Monitoring
Description
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter the keyword threshold to display the
temperature thresholds set for the line cards, RPM, and SFMs.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
125