2.7
How to Use Control Panel
This section explains the function of lamps and keys on the control panel.
Screen (LCD)
Control Keys
POSITION (
) key
............................ There are following functions depending on the operation.
FAST .......................... The tool carriage or the media will move faster when it is pressed simultaneously with
ORIGIN ...................... It will set the current position as an origin point.
COPY ......................... Copy of data in the buffer memory is output.
Menu Keys
SIMPLE ...................... The switch between Simple menu and Normal menu can be performed on the default
PAUSE/MENU ........... It will switch to the MENU mode. MENU lamp is lit in the MENU mode.
COND/TEST .............. It will display the screen to set the tool conditions.
1, 2, 3, 4 ...................... Select the menu number displayed in the screen.
ENTER ....................... It will define the settings.
[2] key
[1] key
[SIMPLE] lamp
[3] key
[4] key
Move the tool carriage and media. It will move specified distance (see "Setting of Step
Movement Distance"
it is pressed down. It will select the menu when
screen.
POSITION key.
It will work as a menu key when it is displaying "FAST" on the screen. Press the [FAST]
key during READY status to display the current area and tool carriage position.
On the default screen, pressing the [ENTER] and [ORIGIN] keys at the same time will
allow you to reset the machine. (Only in Normal menu)
screen.
It will go into MENU mode if it is pressed once, and MENU mode will be turned off when
it is pressed again.
Different function are set in the MENU mode.
Data received while in the MENU mode will be stored in the data buffer.
Use this when checking tool conditions to activate a cutting test.
Press the [ENTER] and [ORIGIN] keys simultaneously on the default screen to reset the
machine.
[SIMPLE] key
[MENU] lamp
[FAST] key
POSITION (
P.3-4
) when it is pressed once, and continuously move when
2-21
[PAUSE/MENU] key
[ORIGIN] key
[COPY] key
[ENTER] key
) key
[COND/TEST] key
are displayed in the menu on the