How To Replace The Control Panel Relay Board, Lcd And Membrane Switch Panel - GRAPHTEC CE5000 Series Service Manual

6.2.9

How to Replace the Control Panel Relay Board, LCD and Membrane Switch Panel

How to detach the control panel relay board, LCD and membrane switch panel
(1) Detach the right side cover (see Subsection 6.1.1).
(2) Disconnect the flexible cables from connector J402 and J403 on the control panel relay board.
(3) Remove the M3L8 self-tapping screw attaching the control panel relay board.
(4) Detach the control panel relay board from the right side cover.
(5) Remove the M3L8 self-tapping screw attaching the LCD assembly.
(6) Detach the LCD assembly from the right side cover.
(7) Slide the LCD and then detach the LCD from the LCD bracket.
CE5000-UM-251-9370
Right side cover
LCD assembly
Right side cover
LCD assembly
LCD bracket
6 DISASSEMBLY AND REASSEMBLY
Control panel relay board
M3L8
selt-tapping screw
M3L8 self-tapping screw
Slide the LCD and then
detach the LCD from the
LCD bracket.
LCD
6-20