Reading The Error Message - GRAPHTEC FC8000 Series User Manual

Operate switches and sensors following the instructions on the
7
screen.
"NORMAL"will be displayed if the operation is detected correctly, and next test will start.
It will return to TESTmenu screen once all the test items are completed.
T est items are as following.
Set lever
1
sensor
+X media
5
sensor
9 [1] key
13 POSITION [? ] key
17 [ENTER] key
21 [CROSSCUT] key

Reading the Error Message

Contents of most current 32 errors can be checked. Errors before that are not recorded.
Operation
Press the [MENU] key.
1
MENU screen is displayed.
Press the POSITION (¡å ) key (ADV .).
2
ADVANCE screen (1/3) is displayed.
Press the POSITION (¡ã ) key.
3
ADVANCE screen (3/3) is displayed.
Next page
2 Home sensor
6 X motor signal
10 [2] key
14 POSITION [? ] key
18 [CONDITION] key
22 [COPY] key
13-22
Push roller
3
sensor
7 Y motor signal
11 [3] key
15 POSITION [¡å ] key
19 [ORIGIN] key
23 [MENU] key
POSITION
POSITION
-X media
4
sensor
8 T ool height signal
12 [4] key
16 POSITION [¡ã ] key
20 [FAST] key
24 [STOP] key