6
Press the [1] key (DONE).
Message for testing is displayed on the screen.
7
Operate switches and sensors following the instructions on
the screen.
"OK" will be displayed if the operation is detected correctly, and next test
will start.
It will return to TEST menu screen once all the test items are completed.
Test items are as following.
1
X Home sensor
5
Tool 1 height signal
9
[3] key
13 POSITION [ ] key
17 [PAUSE/MENU] key
21 [ESC] key
Reading the Error Message
Contents of most current 32 errors can be checked. Errors before that are not recorded.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/3) is displayed.
2
Y motor signal
6
Tool 2 height signal
10 [4] key
14 POSITION [ ] key
18 [COND/TEST] key
22 [ENTER] key
14-26
3
X motor signal
7
[1] key
11 [USER 1/2] key
15 POSITION [ ] key
19 [ORIGIN] key
4
Y motor signal
8
[2] key
12 [SLOW] key
16 POSITION [ ] key
20 [COPY] key