Front View (Ce3000-120); Control Panel - GRAPHTEC CE3000-40 User Manual

I Front View (CE3000-120)
Cutting mat Cutting mat
Cutting mat
Grit roller
Push rollers
Pen carriage
Pen holder
Media set lever

Control panel

Parallel (Centronics) interface connector
USB interface connector
Serial (RS-232C) interface connector
Pen carriage Pen carriage
Grit roller Grit roller
Push rollers Push rollers
; Cutting or plotting is performed on this mat.
; Feeds the medium backward or forward
; Pushes the medium against the grit rollers
; Moves the cutter pen to the left and right
; Holds the cutter pen and moves it up and down
; Raises or lowers the push rollers during loading of a medium
; Used to operate the cutting plotter and set functions
; Used to connect a Centronics-compatible parallel interface cable
; Used to connect a USB cable
; Used to connect an RS-232C serial interface cable
Pen holder Pen holder Media set lever Media set lever
Control panel Control panel
1 – 4
Parallel (Centronics) Parallel (Centronics)
interface connector interface connector
Serial (RS-232C) Serial (RS-232C)
interface connector interface connector
USB interface USB interface
connector connector