Adjust With 3Points; Adjust With 4Points - GRAPHTEC CE7000 Series User Manual

Adjust with 3POINTS

3POINTS adjustment will scan 3 registration marks as shown below, where the adjustment is done measuring
the tilting of the X and Y axes and the distance between the registration marks (horizontal and vertical directions).
This adjustment is called 2-axis adjustment (tilt adjustment).
If the loaded media is tilted as shown below, position of the scanned registration mark is shifted from the position
where it should be. Tilt and distance can be adjusted by comparing these coordinate values.
Difference in X
Difference in X
Original registration
mark position
Difference in Y

Adjust with 4POINTS

4POINTS adjustment will scan 4 registration marks in the corners, where the adjustment is done measuring the
tilting of the X and Y axes and the distance between each of the registration marks. It will perform 2 axes warp
adjustment in addition to the 2 axes (tilt) adjustment and distance adjustment, so it can adjust more precisely
than other methods.
Data
Original registration mark position
Tilt
Tilt
Third registration mark
Print
Image is printed tilted
and warped
GRAPHTEC 2AXES adjusted cut
General 1AXIS adjusted cut
Second registration mark
Difference in Y
First registration mark
Cut
6-3