Locked Print; Paper Source Selection; Tray Priority (Auto Tray Select); Tray Lock - Gestetner G056 Service Manual

6.6.3 LOCKED PRINT

Using this feature, the print job is stored in the machine but will not be printed until
the user inputs an ID at the machine's operation panel. This ID must match the ID
that was input with the printer driver.
• Stored data is automatically deleted after it is printed.
• Stored data can be manually deleted at the operation panel.
• The hard disk can hold up to 30 files, including files stored using sample print.
• The maximum number of pages is 1,000, including jobs using sample print and
collation.
• Locked print uses the same hard disk partition as sample print and collation,
which is 5.4 GB.
NOTE: Locked print requires the installation of an optional hard disk.

6.6.4 PAPER SOURCE SELECTION

Tray Priority (Auto Tray Select)

The Tray Priority setting determines the start
of the tray search when the user selects
"Auto Tray Select" with the driver.
The machine searches for a paper tray with
the specified paper size and type.
When no tray contains paper that matches
the paper size and type specified by the
driver, the controller stops printing until the
user loads the correct paper.
The Tray Priority setting can be specified
using the Paper Input menu of the user tools.

Tray Lock

If Tray Lock is enabled for a tray, the controller skips the "locked" tray in the tray
search process.
NOTE: In this machine, each paper source can be "locked", including the by-pass
feeder. If all paper sources are locked and "Auto Tray Select" is specified
from the driver, the machine displays an error and stops printing.

Manual Tray Select

If the selected tray does not have the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
SM
CONTROLLER FUNCTIONS
Priority Tray
Tray 1
Tray 2 (Optional)
Tray 3 (Optional)
Bypass Feed
6-29
Start of Tray Search
G058D521.WMF
G056/G058