Paper Feed Roller Replacement - Gestetner A294 Service Manual

PAPER FEED

6.8.2 PAPER FEED ROLLER REPLACEMENT

1. Turn off the main switch.
2. Remove the paper tray for the appropriate feed unit. (Refer to Paper Tray
Removal.)
3. Remove the pick-up roller [A] (1 snap ring).
4. Remove the feed roller [B] (1 snap ring).
5. Remove the separation roller [C] from the torque limiter [D] (1 snap ring).
NOTE: 1) The paper feed rollers (pick-up, feed, separation) used in the 1st ~ 3rd
feed units in the paper tray unit are different from the rollers used in the
LCT. They are not interchangeable.
2) Do not touch the surface of the rollers with your bare hands.
Note that there are counters for these rollers that you may wish to reset after
installing a new roller (SP 7-816).
A294/A295
CÓPIA NÃO CONTROLADA
[D] [C]
6-60
CÓPIA NÃO CONTROLADA
[B]
[A]
A294R804.WMF
SM