Clutch Release Cylinder Removal/Installation - Mazda MX-5 Miata Sport 2007 Manual

Fig. 13: Removing Snap Ring
Courtesy of MAZDA MOTORS CORP.

CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION

CAUTION:
1. Remove in the order indicated in Fig. 14 .
2. Install in the reverse order of removal.
3. Bleed the air from the system.
(See CLUTCH FLUID REPLACEMENT .)
4. Inspect and adjust the clutch pedal. (See CLUTCH PEDAL ADJUSTMENT .)
2007 Mazda MX-5 Miata Sport
2007 TRANSMISSION Clutch - MX-5 Miata
Fluid will damage painted surfaces. Be careful not to spill any fluid

on painted surfaces. If fluid does get on painted surfaces, wipe it off
immediately.