Telnet Ipv6 - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Reply from 2001::1
bytes=
Sequence=
hop limit=
time =
--- 2001::1 ping
statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip
min/avg/max = 0/4/20
ms

2.1.2 telnet ipv6

Syntax
telnet ipv6 remote-system [ -i interface-type interface-number ] [ port-number ]
View
User view
Parameters
remote-system: IPv6 address or host name (a string a 1 to 46 characters) of the
destination device.
-i interface-type interface-number: Specifies the type and number of an outgoing
interface. This argument takes effect only when the destination address is a link-local
address and the specified outgoing interface has a link-local address.
port-number: Specifies the port number linked with a Telnet server, ranging from 0 to
65535, with the default of 23.
Description
Use the telnet ipv6 command to log onto another device for remote management from
the local device. You can break Telnet logging-in by entering <Ctrl+K>.
Field
An ICMPv6 reply message is received from the device at
2001::1.
If no ICMPv6 reply is received within the timeout time,
"Request time out" is displayed.
Number of data bytes in the ICMPv6 reply message
Packet sequence number
TTL in the ICMP reply message, similar to the TTL in the
output information of IPv4 ping operations.
Round-trip response time
Statistics obtained by pinging the IPv6 address 2001::1
Number of sent packets
Number of received packets
Packet loss percentage
Minimum/average/maximum response time, in
milliseconds.
Chapter 2 IPv6 Application Configuration
Description
2-3
Commands