Figure 2-35 Powering Up The Library - Overland Storage Neo Series Library Service Manual

3) Replace the power supply locking bracket with the two mounting screws.
4) Turn on the library module as follows, see
1
Figure 2–35. Powering up the Library
a.Connect the power cord to the power supply's receptacle (1).
b.Toggle the power switch located on the power supply to ON (2).
c.Press anywhere on the GUI touch screen to apply power to the module (3).
Figure 2–35.
2
3
P S R R
OWER UPPLY EMOVE AND EPLACE
Neo-0004
Servicing the Neo Series 2000 2-35
t