Figure 2-28 Powering Up The Library - Overland Storage Neo Series Library Service Manual

4) Replace the left magazine and close the left magazine door.
5) Replace the tabletop cover and front main cover using
instructions in this chapter.
6) Turn on the library module as follows: (see
1
Figure 2–28. Powering up the Library
a.Connect the power cord to the power supply's receptacle (1).
b.Toggle the power switch located on the power supply to ON (2).
c.Press anywhere on the GUI touch screen to apply power to the module (3).
Figure 2–28.)
2
3
M I S
AGAZINE NTERLOCK OLENOID
"Library Covers Remove and Replace"
Neo-0004
Servicing the Neo Series 2000
A
SSEMBLY
2-29
t