Lcd Contrast Controls; Figure 4-13 Move Media Screen (Source); Figure 4-14 Move Media Screen (Destination) - Overland Storage Neo Series Library Service Manual

3) Touch the Destination Input Box on the Move Media Screen. The Destination Input Box will
change from gray to an active state
4) Touch the destination option you want to move media to from the Destination Element Type
selections. The options available are Drive, Mail Slot and Slot. Repeat selecting the desired
destination option until the desired option is displayed in the Destination Input Box, for
example, touching Slot three times displays Slot 3 in the Destination Input Box,
5) Touch the "Execute Move" button. The library robotics move the cartridge from Drive 2 to
Slot 3.

LCD Contrast Controls

Selecting these options let you increase or decrease the contrast of the LCD display. Incremental steps
are set by adjusting the LCD contrast controls (up and down arrows) from the upper right corner of the
Library Default Screen, (Figure
preference.
Figure 4–13. Move Media Screen (Source)
Figure 4–14.
Figure 4–14. Move Media Screen (Destination)
4–7). Incremental steps can range from 0 to 31 depending on your
L D S O
IBRARY ISPLAY CREENS AND
Figure
Operation
PTIONS
4–14.
4-11
t