Figure 3-38 Applying Power - Overland Storage Neo Series Library Service Manual

6) Replace the Power Supply using
chapter.
7) Turn on the library module as follows,
a. Connect the power cords to the power supply's receptacle (1).
b. Toggle the power switches located on the power supply to ON (2).
c. Press anywhere on the GUI touch screen to apply power to the module (3).
2
1
P
"Power Supply Remove and Replace"
(Figure 3–38).
Figure 3–38. Applying Power
S R R
OWER UPPLY ECEIVER EMOVE AND
instructions in this
3
Servicing the Neo Series 4000
R
EPLACE
3-41
t