Figure 2-26 Powering Up The Library - Overland Storage Neo Series Library Service Manual

4) Replace the tabletop cover and front main cover using
instructions in this chapter.
5) Turn on the library module as follows: (see
1
Figure 2–26. Powering up the Library
a.Connect the power cord to the power supply's receptacle (1).
b.Toggle the power switch located on the power supply to ON (2).
c.Press anywhere on the GUI touch screen to apply power to the module (3).
Figure 2–26).
2
3
C P PCB R
ONTROL ANEL EMOVE AND
"Library Covers Remove and Replace"
Neo-0004
Servicing the Neo Series 2000
R
EPLACE
2-27
t