Overland Storage Neo Series Library Service Manual page 3

Preface
Purpose of This Manual
This manual provides step-by-step installation instructions, and information required for ongoing
use and maintenance for the Neo Series
of this equipment. The following information is contained in this manual:
Chapter 1: "Illustrated Parts Catalog"
Includes graphic representations of Neo Series Libraries.
Chapter 2: "Servicing the Neo Series 2000"
ing and replacing Neo Series™ 2000 Library components.
Chapter3 "Servicing the Neo Series 4000"
ing and replacing Neo Series™ 4000 Library components.
Chapter 4: "Operation"
with inserting and removing tape cartridges, and tape requirements.
Chapter 5: "Troubleshooting"
codes and correction procedures for Neo Series Libraries.
Chapter 6: "Connectors, Switches and Indicators"
switches, and LED indicators for the Neo Series Libraries
Appendix A: "Specification"
ance information.
Appendix B: "Vertical Axis Alignment"
vertical axis assembly. This procedure is required when components are
removed or replaced
Appendix C: "Elevator Assembly Installation"
tion including: rack preparation, minimum firmware, mechanical installation,
configuration and cabling.
Libraries. This manual is written for the service provider
™
- Provides an illustrated parts and spares list.
- Presents step-by-step procedures for remov-
- Presents step-by-step procedures for remov-
- Describes front panel operations for the Neo Series Library along
- Describes the Power-On-Self-Test (POST) diagnostic test,
- Contains Neo Series Library specifications, and EMI compli-
- Presents step-by-step procedures for aligning the
- Presents procedures for Elevator installa-
Neo Series Libraries
- Lists and Describes the connectors,
Preface i
t