Power Supply Replacement - Overland Storage Neo Series Library Service Manual

P S R R
OWER UPPLY EMOVE AND EPLACE

Power Supply Replacement

1) Position the power supply at the rear of the library with the latch at the top and the Master
Power Switch at the bottom, (Figure 3–36).
NOTE: Verify that the replacement Power Supply power switch is in the (O) position.
2) Push the Power Supply into the receiver until the latch engages (Figure 3–36).
3) Replace the power supply locking bracket with the mounting screw.
4) Depress the Master Power Switch to the On position.
3-38 Servicing the Neo Series 4000
u