Overland Storage Neo Series Library Service Manual page 250

F S C (FSC )
AULT YMPTOM ODES S
5-10 Troubleshooting
u
Table 5-2 Fault Symptom Codes (Continued)
Message
Deactivation of a drive failed
Drive removal failed
Drive is Active failed
Control Com Unidentified
Drive status update failed
Loader command execution failed
Sequential command execution failed
Destination Xchg for msg. was Null
Bad src mod in peg msg
A Peg message has a pointer to NULL.
Xchg conversion failed
Invalid L-drive number to convert
Invalid P-drive number to convert
Invalid mod number to convert
Unknown drive type
FSC ERP
700F C,G The Control task is indicating that a
request to deactivate a drive failed;
reason is not known.
7010 C,G The Drive task is indicating that a request
to power-down a drive failed; reason is
not known.
7012 C,G The Drive task is indicating that a request
to determine if a drive is executing a host
command failed; reason is not known.
7013 C,G During HotSwap, a command response
from the Control task could not be
associated with any outstanding
command.
7014 C,G The Drive task is indicating that a request
to determine the current state of a drive
failed; reason is not known.
7015 C,G The Loader task is indicating that a
command has failed to complete
successfully.
7016 C,G The Sequential task is indicating that a
command has failed to complete
successfully.
7017 C,G Attempting to send a message to a task,
but the argument exchange pointer was
NULL.
7018 C,G A message was received from a remote
module, but the module number was out
of range.
7019 C,G Peg message wrapping a Null msg. ptr.
701A C,G Attempt to determine the module number
containing the task that is returning a
command response failed.
701B C,G Attempt to send a command to a drive,
but the logical drive number is out of
range.
701C C,G Attempt to send a command to a drive,
but the physical drive number is out of
range.
701D C,G Attempt to send a command to a drive in a
remote module, but the module number is
out of range.
701E C,G Attempt to show detailed drive status of a
drive whose type is unknown.