Viewing active sessions
To view the Management application active sessions, complete the following steps.
1. Select Server > Active Sessions.
2. Review the active session information.
3. Click Close.
Disconnecting users
To disconnect a user, complete the following steps.
1. Select Server > Active Sessions.
2. Select the user you want to disconnect and click Disconnect.
3. Click Yes on the confirmation message.
4. The user you disconnected receives the following message:
5. Click Close.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Active Sessions dialog box displays
FIGURE 18
Active Sessions dialog box
The following information displays:
•
ID—Displays the name of the user (for example, Administrator).
•
Description—Displays the description of the user (for example, Operator).
•
Network Address—Displays the network address of the user.
•
Client Type—Displays the type of Management application client.
•
Connected—Displays the date and time the user connected to the server.
The Active Sessions dialog box displays.
The Client has been disconnected by
Disconnected_Date_and_Time
When you disconnect a client from using the Active Sessions dialog box, the following event
displays in the Master Log: Disconnect Client
Management server and client
(Figure
19).
User_Name
from
.
User_Name
IP_Address
at
IP_Address
@
.
1
33