Restoring A Master Key From A Smart Card Set - Brocade Communications Systems Brocade 8/12c User Manual

6. Enter the key ID of the master key that was backed up to the key vault.
7.
8. Click OK.

Restoring a master key from a smart card set

A card reader must be attached to the SAN Management application PC to complete this
procedure.
Use the following procedure to restore the master key from a set of smart cards.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Restore Master Key as the Master Key Action.
FIGURE 255
4. Choose the active or alternate master key for restoration, as appropriate. Refer to
5. Select A Recovery Set of Smart Cards as the Restore From location.
Brocade Network Advisor SAN User Manual
53-1002167-01
Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
The Encryption Center dialog box displays
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Restore Master Key for Encryption Group dialog box displays
Select a Master Key to Restore (from a recovery set of smart cards) dialog box
master key" on page 540 and
active and alternate master keys.
(Figure 153).
"Alternate master key" on page 540 for more information on
18
Master keys
(Figure 255).
"Active
547