Importing A Signed Kac Certificate Into A Switch - Brocade Communications Systems Brocade 8/12c User Manual

18
Steps for connecting to a TEMS appliance
4. In the user table under the Certificate column, click the pen icon for the newly created user.
5. Enter the CSR file name exported from the switch in the From File box, or if you copied the CSR
6. Click Sign.
7.
8. Click Save and enter the destination location for this signed certificate. Save the certificate
9. Perform the above steps for both the primary and secondary key vaults using the same user

Importing a signed KAC certificate into a switch

After a KAC CSR has been submitted and signed by a CA, the signed certificate must be imported
into the switch.
1. From the Encryption Center, select Switch > Import Certificate.
FIGURE 173
2. Browse to the location where the signed certificate is stored.
3. Click OK.
468
The Sign Certificate Request page displays.
from Switch > Properties, paste the CSR file contents to the From Text box.
Under the Certificate column, click the export icon (globe with an arrow).
A file save dialog displays.
with a Privacy Enhanced Mail (.pem) extension.
name, password, and group.
The Import Signed Certificate dialog box displays
Import Signed Certificate dialog box
The signed certificate is stored on the switch.
(Figure 173).
Brocade Network Advisor SAN User Manual
53-1002167-01