13
Adapter software
Deleting a boot image from the repository
1. Select one or more driver files from the Available Driver Files list on the Driver Repository
2. Click Delete.
Boot Image Repository
The boot code image stored in the adapter's flash contains the instructions that enable the server
to locate the boot disk in SAN. The boot code image contains basic input/output system (BIOS),
extensible firmware interface (EFI), and open firmware which enable the adapters to be compatible
with any system platform.
Boot images are required for adapters that are shipped without a boot image or when it is
necessary to overwrite images on adapters that contain older or corrupted boot image versions.
1. From the Management application menu bar, select Configure > Host > Adapter Software.
2. Click the Boot Image tab.
FIGURE 109
316
dialog box.
The driver file is removed from the Driver Repository dialog box.
NOTE
Windows drivers (.exe files) cannot be imported into the server repository when the
Management application server is running on Linux or Solaris platforms.
The Boot Image Management dialog box, shown in
Boot Image Management dialog box
Figure
109, displays.
Brocade Network Advisor SAN User Manual
53-1002167-01