6. Select one or more of the following event types:
7.
8. Click OK on the Port Auto Disable dialog box.
Enabling port auto disable on individual ports
NOTE
The device must be running Fabric OS 6.3 or later.
To enable port auto disable on individual ports, complete the following steps.
1. Select Configure > Port Auto Disable.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Choose one of the following options from the Show list to filter the port list:
4. Select the ports on which you want to enable PAD.
5. Click Configure.
6. Select one or more of the following event types:
7.
8. Click OK on the Port Auto Disable dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Port Auto Disable
•
Loss Of Sync—Requires devices running Fabric OS 7.0 or later.
•
Loss Of Signal—Requires devices running Fabric OS 7.0 or later.
•
OLS (Offline Primitive Sequence)—Requires devices running Fabric OS 7.0 or later.
•
NOS (Not Operational Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
•
LIP (Loop Initialization Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
Click OK on the Configure Port Auto Disable dialog box.
The Port Auto Disable dialog box displays.
•
All Ports (default)—Displays all ports in the fabric.
•
Disabled PAD—Displays only ports where PAD is disabled.
The Configure Port Auto Disable dialog box displays.
•
Port Auto Disable
•
Loss Of Sync—Requires devices running Fabric OS 7.0 or later.
•
Loss Of Signal—Requires devices running Fabric OS 7.0 or later.
•
OLS (Offline Primitive Sequence)—Requires devices running Fabric OS 7.0 or later.
•
NOS (Not Operational Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
•
LIP (Loop Initialization Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
Click OK on the Configure Port Auto Disable dialog box.
10
Port Auto Disable
289