Enabling Persistently Disabled Ports - Brocade Communications Systems 8 Administrator's Manual

2
Configuration steps

Enabling persistently disabled ports

Ports must be disabled while they are being configured. Before an FCIP tunnel can be used, the
associated ports must be persistently enabled.
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the portCfgShow command to view ports that are persistently disabled.
3. After identifying the ports, enter the portCfgPersistentEnable command to enable the ports.
4. Enter the portCfgShow command to verify the port is persistently enabled.
36 Fabric OS FCIP Administrator's Guide
53-1001766-01