Enabling Or Disabling Threshold Alarms For Individual Elements - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

6. Select the check box for the type of notification method you want to use for each event type.
7.

Enabling or disabling threshold alarms for individual elements

To configure element-specific alarm settings, perform the following steps.
1. Open the Fabric Watch window.
2. In Fabric Watch Explorer, select a class.
3. Select the Threshold Configuration tab.
4. Under Area Selection, select the area with the alarms that you want to enable or disable.
5. Select the Element Configuration subtab.
6. Select an element from the Element Selection menu.
7.
8. Select the Triggered behavior type to receive threshold alarms only when they are triggered by
9. Select a time interval in which to receive the threshold alarms from the Time Interval menu.
10. Click Apply.
11. Optional: Apply the selections on this panel to multiple elements simultaneously.
Fabric Watch Administrator's Guide
53-1002752-01
•
Click Custom Defined to specify new settings and proceed to the next step.
The available alarm actions are:
•
ERROR_LOG
•
SNMP_TRAP
•
PORT_LOG_LOCK
•
EMAIL_ALERT
Click Apply.
You can set alarms for information on a switch only if that information is monitored by Fabric
Watch for that switch; not all alarm options are available for all switches.
In the Status area:
•
To disable threshold alarms, click Disabled and click Apply. The threshold alarms are
disabled and you do not need to continue with this procedure.
•
To enable threshold alarms, click Enabled and continue with the next step.
events that you defined.
a. Click Apply More. The Multiple Selection dialog box displays.
b. Click the boxes next to the indices of all applicable elements.
c. Click OK.
Fabric Watch Configuration Using Web Tools
9
91