Configuring Port Auto Disable Triggers - Brocade Communications Systems Brocade 8/12c User Manual

10
Port Auto Disable
4. Click OK on the Port Auto Disable dialog box.

Configuring port auto disable triggers

NOTE
The device must be running Fabric OS 7.0 or later.
You can configure a port to become blocked when one or more of the following events occur on the
configured port:
•
•
•
•
•
To configure the port auto disable events, complete the following steps.
1. Select Configure > Port Auto Disable.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select All Ports from the Show list to filter the port list:
4. Select one or more ports or devices on which you want to enable PAD.
5. Click Configure.
288
•
Loss of Sync—Whether the Loss of Sync event is enabled or disabled in port auto disable.
•
Loss of Signal—Whether the Loss of Signal event is enabled or disabled in port auto
disable.
•
OLS—Whether the Offline Primitive Sequence event is enabled or disabled in port auto
disable.
•
NOS—Whether the Not Operational Primitive Sequence event is enabled or disabled in port
auto disable.
•
LIP—Whether the Loop Initialization Primitive Sequence event is enabled or disabled in
port auto disable.
•
Port Type—Displays the port type.
•
Port Number—Displays the port number.
•
Port WWN—Displays the port world wide name.
•
Port Name—Displays the port name.
•
User Port #—Displays the user port number.
•
PID—Displays the port identifier.
•
Connected Port #—Displays the connected port number.
•
Connected Port WWN—Displays the connected port world wide name.
•
Connected Port Name—Displays the connected port name.
Loss Of Sync
Loss OF Signal
OLS (Offline Primitive Sequence)
NOS (Not Operational Primitive Sequence)
LIP (Loop Initialization Primitive Sequence)
The Port Auto Disable dialog box displays.
The Configure Port Auto Disable dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002167-01