7
Customizing the layout of connections on the topology
3. Select the Set as Default Layout check box to set your selection as the default.
4. Click OK on the Map Display Properties dialog box.
Customizing the layout of connections on the topology
You can change the way inter-device connections display on the topology.
1. Right-click a group or the Connectivity Map and select Map Display.
2. Select one of the following options from the Line Tepe list:
3. Select the Set as Default Layout check box to set your selection as the default.
4. Click OK on the Map Display Properties dialog box.
Changing a group background color
You can customize the topology by changing the background color of a group.
1. Right-click a group or the Connectivity Map and select Map Display.
2. Select the Custom option and click Change.
FIGURE 68
182
The Map Display Properties dialog box displays.
•
Straight. Select to display connections using straight lines.
•
Orthogonal. Select to display connections in orthogonal grid lines. Disabled if Free Form is
selected in Map Display Layout area.
•
None. Select to hide the connections between devices.
The Map Display Properties dialog box displays.
The Choose a background color dialog box displays
Choose a background color dialog box
(Figure
68).
Brocade Network Advisor SAN User Manual
53-1002167-01