Customizing Basic Monitoring Graphs - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

4. Click OK.

Customizing basic monitoring graphs

You can customize some of the basic performance monitoring graphs to display information for
particular ports. For the Brocade 8510-8, Brocade 8510-4, and Brocade DCX and DCX-4S
enterprise-class platforms, you can also customize these graphs to display information for a slot.
You can customize the following graphs:
•
•
•
The following procedure assumes that you already created one of these customizable graphs.
1. Create or access the graph you want to customize.
2. For Brocade 8510-8, Brocade 8510-4, and Brocade DCX and DCX-4S enterprise-class
3. To display detailed port throughput utilization rates for particular ports only, right-click
Web Tools Administrator's Guide
53-1002756-01
NOTE
For the Brocade 300, 5100, 5300, 6510, 6520, VA-40FC, 7800 Extension, 8000, and the
Encryption Switch, enter only a port number.
The graph is displayed in a window in the Performance Monitor window.
Switch Throughput Utilization
Switch Percent Utilization
Port Snapshot Error
Refer to "Creating basic performance monitor graphs"
a graph.
platforms, display the detailed port throughput utilization rates for each port in a slot by
clicking the arrows next to a slot. The port information for that slot displays in the graph.
NOTE
For the Brocade 300, 5100, 5300, 6510, 6520, VA-40FC, 7800 Extension, 8000, and the
Encryption Switch, proceed to
anywhere in the graph and click Select Ports.
The setup dialog box displays, as shown in
The title of the dialog box varies, depending on the type of graph you are customizing, but the
layout of the dialog box is the same.
the Edit Switch Throughput Utilization graph.

Customizing basic monitoring graphs

on page 94 for instructions on creating
step 3.
Figure 23.
Figure 23 displays an example of the setup dialog box for
7
95