Customizing The Layout Of Connections On The Topology; Changing A Group's Background Color - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

2. Select the Set as Default Layout check box to set your selection as the default.
3. Click OK on the Map Display Properties dialog box.

Customizing the layout of connections on the topology

You can change the way inter-device connections display on the topology.
1. Right-click a group or the Connectivity Map and select Map Display, then select one of the
2. Select the Set as Default Layout check box to set your selection as the default.
3. Click OK on the Map Display Properties dialog box.

Changing a group's background color

You can customize the topology by changing a group's background color.
1. Right-click a group or the Connectivity Map and select Map Display.
FIGURE 58
DCFM Professional Plus User Manual
53-1001774-01
•
Vertical. Displays the device icons vertically.
•
Horizontal. Displays the device icons horizontally.
•
Most Connected at Center. Displays the node that has the most connections at the center
of the topology.
•
Directional. Displays the internal nodes in a position where they mirror the external groups
to which they are connected.
following options:
•
Straight. Displays connections using straight lines.
•
Orthogonal. Displays connections in orthogonal grid lines. Disabled if Free Form is
selected in Map Display Layout area.
•
None. Hides the connections between devices.
The Map Display Properties dialog box displays
Map Display dialog box
(Figure 58).
5
129