General Tab; Members Tab - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

General tab

The properties displayed in the General tab are described below.
•
•
•
•
•
•
•
•
•
•
•
•

Members tab

The Group Members tab lists group switches, their role, and their connection status with the group
leader. The tab displays the configured membership for the group (none of the table columns are
editable). The list can be different from the members displayed in the Encryption Center dialog box
if some configured members are unmanaged, missing, or in a different group.
Possible Connection Status values are as follows:
•
•
•
•
•
DCFM Professional Plus User Manual
53-1001774-01
Encryption group name - the name of the encryption group.
Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
Deployment mode - the group's deployment mode, which is transparent.
Failback mode - The group's failback mode, which can be automatic or manual. The failback
mode can be changed by clicking on the field and selecting the desired mode.
Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM),
HP Secure Key Manager (SKM), Thales Encryption Manager for Storage (TEMS), or Tivoli Key
Lifetime Manager (TKLM.
REPL Support - whether or not remote replication LUNs support is enabled or disabled. You can
change the current setting by clicking on the field and selecting the desired state.
Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
Primary Key Vault Connection Status - the status of the connection to the primary key vault. In
an operating environment, the status should be Connected.
Backup key vault IP address - the IP address of the backup key vault.
Backup Key Vault Connection Status - the status of the connection to the backup key vault, if a
backup is configured.
Primary key vault certificate - the details of the primary vault certificate; for example, version
and signature information.
Backup key vault certificate - the details of the backup vault certificate; for example, version
and signature information.
Group Leader - this switch is the group leader so there is no connection status.
Trying to Contact - the member is not responding to the group leader. This may occur if the
member switch is not reachable by way of the management port, or if the member switch does
not believe it is part of the encryption group.
Configuring - the member switch has responded and the group leader is exchanging
information. This is a transient condition that exists for a short time after a switch is added or
restored to a group.
OK - the member switch is responding to the group leader switch.
Not Available - the group leader is not a managed switch, so connection statuses are not being
collected from the group leader.
18
543