3
Displaying the Name Server entries
For FICON devices: The Name Server table lists the request node identification (RNID) information.
To display the Name Servers, perform the following steps.
1. Select Tasks > Monitor > Name Server.
2. To set an autorefresh rate for the Name Server entries, select the Auto Refresh check box in
Printing the Name Server entries
To set up printing preferences, perform the following steps.
1. Select Tasks > Monitor > Name Server.
2. Click Print.
3. On the Page Setup dialog box, set up your printing preferences and click OK.
4. Select a printer and click OK.
Displaying Name Server information for a particular device
To display Name Server information for a particular device, perform the following steps.
1. Select Tasks > Monitor > Name Server.
2. Select a device from the Domain column.
3. Click Detail View.
Displaying zone members for a particular device
To display zone members for a particular device, perform the following steps.
1. Select Tasks > Monitor > Name Server.
2. Select a device from the Domain column.
3. Click Accessible Devices.
52
The Name Server window displays.
the Name Server window, and enter an auto-refresh interval (in seconds).
The minimum (and default) interval is 15 seconds.
The Name Server window displays.
The Print dialog box displays.
The Name Server window displays.
The Name Server Information dialog box displays the information specific to that device.
The Name Server window displays.
The Zone Accessible Devices window displays accessible zone member information specific to
that device.
Web Tools Adminstrator's Guide
53-1002152-01