Saving A Master Key To A Key Vault - Brocade Communications Systems WFT-2D User Manual

20
Master keys
6. Enter the passphrase, which is required for restoring the master key. The passphrase can be
7.
ATTENTION
Save the passphrase. This passphrase is required if you ever need to restore the master key from
the file.

Saving a master key to a key vault

Use the following procedure to save the master key to a key vault.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Backup Master Key as the Master Key Action.
FIGURE 396
4. Select Key Vault as the Backup Destination.
5. Enter the passphrase, which is required for restoring the master key. The passphrase can be
844
between eight and 40 characters, and any character is allowed.
Re-enter the passphrase for verification, then click OK.
dialog box. (Refer to Figure 266
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Backup Master Key for Encryption Group dialog box displays. (Refer to
Backup Master Key for Encryption Group dialog box - Backup Destination to key vault
between eight and 40 characters, and any character is allowed.
on page 694.)
Brocade Network Advisor SAN User Manual
Figure 396.)
53-1003154-01