Enabling A Cee Port Or Lag; Deleting A Lag - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

17

Enabling a CEE port or LAG

Enabling a CEE port or LAG
If you select multiple switches or multiple ports and LAGs from two or more switches, both the
Enable button and the Disable button are disabled.
1. Select Configure > Switch > CEE from the menu bar.
2. Select one or more CEE ports or LAGs (which can span multiple switches) that you want to
3. Click Enable.
4. Click OK.
5. Review the changes carefully before you accept them.
6. Click Start to apply the changes, or click Close to abort the operation.

Deleting a LAG

You can only delete a link aggregation group (LAG) that is selected from a single switch. If you select
multiple switches or multiple ports from two or more switches, the Delete button is disabled.
1. Select Configure > Switch > CEE from the menu bar.
2. Select one or more LAGs (that can span multiple switches) that you want to delete from the
3. Click Delete.
4. Click OK.
5. Review the changes carefully before you accept them.
6. Click Start to apply the changes, or click Close to abort the operation.
434
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
enable.
NOTE
All selected LAGs must be in the same state (enabled or disabled); otherwise, both the Enable
and Disable buttons are disabled.
The selected CEE port or LAG is enabled for CEE configuration.
The CEE Confirmation and Status dialog box displays.
The selected CEE port or LAG is enabled for CEE configuration. (The Status column in the CEE
Configuration dialog reflects the change).
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
Products/Ports table.
The CEE Confirmation and Status dialog box displays.
The LAG is removed from the Products/Ports list and any of the LAG members display without
the LAG containment.
DCFM Enterprise User Manual
53-1001775-01