Cimom Configuration - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

CIMOM configuration

NOTE
You must have Security Read and Write privileges to make changes on the CIMOM tab.
The CIMOM tab enables you to configure the CIMOM server port, the Bind Network Address, and
the CIMOM log.
Configuring the SMI Agent port number
To configure the SMI Agent port number, complete the following steps.
1. Click the CIMOM tab.
2. Select or clear the Enable SSL check box, to enable or disable SSL for the SMI Agent.
3. Enter the SMI Agent port number in the SMI Agent Port # field.
DCFM Enterprise User Manual
53-1001775-01
FIGURE 78
CIMOM tab
NOTE
Disabling SSL will disable Indication and Client Mutual Authentication.
If the check box is checked (default), SSL is enabled. If the check box is clear, SSL is disabled.
This port number must be within the range of 1 through 65535. Defaults are 5989 with SSL
enabled and 5988 with SSL disabled.
CIMOM configuration
7
175