Adding An Option To A Device's Shortcut Menu - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

5. Click Update to remove the tool.
6. Click OK to save your work and close the Setup Tools dialog box.

Adding an option to a device's shortcut menu

You can add an option to a device's shortcut menu.
1. Select Tools > Setup.
2. Type or select the text in the Menu Text list as you want it to appear on the menu.
3. Choose one of the following options:
4. Select the appropriate type in the Condition 1 Property name list.
5. Enter the appropriate value for the selected property in the Condition 1 Value field.
6. (Optional) Select the Condition 2 Property type and enter the Value for that property type
7.
8. Select the Append device ID check box to specify the parameter used when opening the tool.
9. Click Add to add the new menu item.
10. Click OK to save your work and close the Setup Tools dialog box.
DCFM Professional Plus User Manual
53-1001774-01
If the tool is not being utilized, no confirmation message displays.
The Setup Tools dialog box displays.
Click the Product Menu tab.
The Product Popup Menu Items table displays all configured shortcut menu options.
-
To display the menu option only for devices that meet the conditions listed, select the
Match Conditions option.
-
To display the menu option on the shortcut menus for all devices, select the All option.
If you select All, skip to
(Condition 1 AND Condition 2 must be true) to define a second condition to be simultaneously
true.
NOTE
To set up a condition where Condition 1 OR Condition 2 must be true, define two menu items,
one for each condition.
Select the tool that you want to launch from the Tool list, or click Define to add a tool.
To specify a new tool, refer to
-
To specify that the device's IP address should be used when opening the tool, select the IP
Address option.
-
To specify that the device's Node WWN should be used when opening the tool, select the
Node WWN option.
It displays in the Product Popup Menu Items table.
NOTE
You must click Add before clicking OK; otherwise, your changes will be lost.
step 7. Otherwise, continue to
"Adding a tool" on page 146.
step 4.
6
149